Find OMB Type Lpg Cng Rail Injector, Gaseous LPG Natural Gas Rail Injector, DC12V Rail Type Autogas Electro Injector on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
4Cyl 3Ohms IG1 Apache LPG CNG Injector Rail
Home > Products > Gas Cylinder Manifold > 4Cyl 3Ohms IG1 Apache LPG CNG Injector Rail

4Cyl 3Ohms IG1 Apache LPG CNG Injector Rail

4Cyl 3Ohms IG1 Apache LPG CNG Injector Rail

    Payment Type: L/C,T/T,Paypal,Money Gram,Western Union
    Terms of Trade: FOB,CFR,CIF,EXW
    Min. Order: 1 Piece/Pieces
    Delivery Time: 4-8 Days
    Packaging: Plastic bag, Box, Carton, Pallet
    Productivity: 160000 pcs per month
    Brand: Brando
    Transportation: Ocean,Land,Air
    Place of Origin: China Ningbo
    Supply Ability: 40000 pcs per week
    Certificate: CE
    Port: Ningbo,Guangzhou,Shanghai

Basic Info

Model No.: IG1 Apache

Product Description

4Cyl 3Ohms IG1 Apache LPG CNG Injector Rail


The body of 4Cyl 3Ohms IG1 Apache LPG CNG Rail Injector is made of aluminum and has been lightened to facilitate a better heat exchange. With the sensitivity towards dirt accumulation limited to the minimum, LPG Conversion Rail Injector remains largely immune to such minor issues. Its reasonable price furthers its case of being an attractive proposition.


TECHNICAL SPECIFICATION:
1. WORKING PRESSURE: from 0.5 to 2.0 bar
2. MAX PRESSURE: 3.0 bar
3. SUPPLY VOLTAGE: 10.8 - 14.4 V
4. INLET GAS FITTING: Rubber hose Ø10mm, Ø12mm (Ø16mm 3/8’’, 1/2’’ available on request)
5. OUTLET GAS FITTING: Calibrated nozzles M8x1
6. CALIBRATED HOLE RANGE (for nozzles): 1.0 - 3.5 mm (0.25mm step)
7. T range for LPG: -20 to +120° C
8. T range for CNG: -40 to +120° C
9. Approvals: 67R-01/110R-00/ISO 1550


Main dimension of 4Cyl 3Ohm IG1 Apache LPG CNG Injector Rail:

IG1 Apache OMB Injector rail


Technical parameters of 3 Ohm 4 Cylinder IG1 Apache Rail Injector:

Type IG1 Apache
Supply voltage DC10.8V to DC14.4V
Resistance 3ohm
Spray path φ2.2mm, φ2.5mm
Orifice size φ3.5mm
Inlet gas fitting φ10mm, φ12mm, φ14mm, φ16mm
Motion pattern Direct acting
Pressure 0.5 to 2.6 Bar
Temperature of media -40 to 120°C
Applicable medium LPG, CNG
Intake mode Both sides (Intake port can be installed)
Opening time 2.2ms±5
Approvals 67R-01, 110R-00, ISO 15500

Details display of RAIL / OMB Type Lpg Cng Autogas Electro Rail Injector:

RAIL / OMB Type Lpg Cng Autogas Electro Rail Injector

Individual packing of RAIL / OMB Type LPG CNG Sequential System Injector Rail:

RAIL / OMB Type LPG CNG Sequential System Injector Rail

Brief Introduction:

The injector IG1 is characterized by a simple and economical construction which makes it resistant to the oily gas residue, ensuring a long operation with minimal maintenance.


Regarding the gas flow, the injector is produced in a unique version.


The outer body of the electro-injector unit is made of diamagnetic materials, resistant to corrosion and temperatures typical of the engine compartment. The input connection of the electro-injector is realised via a connector to the tube coming from the vaporizer and the output connection via a nozzle calibrated to the tube connected to the intake manifold near the intake valve. The section of the nozzle exiting from the electro-injector is suitable chosen in relation to the engine’s specific power class.

They are characterized by the presence of a lightened aluminum casing, to improve the thermal exchange and reduce the weight of the rail.

The rail (4, 3 or 2 injectors) has a single gas inlet in communication with a duct made inside. From this duct, the gas can flow in the single injectors.

The power supply of the injectors is provided by a single connector plugged to the main wiring. The connector is sealed, IP54 conform.


Focus on your demands, Offer you best solution:


√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing


Welcome to your any question and inquiry!

NINGBO BRANDO HARDWARE CO.,LTD

 


BRANDO is one of leading manufacturers of solenoids, armature assembly, and solenoid valve in China, located in China main sea port city -- NINGBO, the location with high convenience of shipment not only by air but also by ocean.

4


BRANDO has 4800 square meter workshops and around 50 employees, developed about 10 years from year 2008 by focusing on products quality, design, service, now with good reputation from all over the world and our annual output value increasing yearly by yearly, moreover, more than 90% of annual output value is from exporting brought from our high quality and best customer service. We highly believe to run the company and brand well should keep faith of BEST QUALITY, BEST ATTITUDE, and BEST CUSTOMER SERVICE.

1


BRANDO`s products range covering solenoid coil, solenoid valve armature assembly, various solenoid valves, fluid medium such like pneumatic, hydraulic, water, hot water, air, steam, gas, oil, chemical liquid and others. We supply OEM and ODM, all products widely applications for automotive, automation, textile industry, pneumatic , hydraulic, air and water treatment systems and so on.
Model series have such like Q22HD, 2W, 2S, US, 2L, 223, 6014, 0311, 0927, 0955, PU220, PU225, 2P, 2V, VX2120, QX, VX22, VX31/32/33, ZQDF, SCG, CA, DMF, 4V100, 4V200, 4V300, 4V400, VF, VZ, EVR, etc... Any request just feel free to contact our sales team, will response once get message, email or calling.
BRANDO company is approved by ISO9001:2008 system and managed by 5S management, with clean workshop environment and high precision machines and strict operation paperwork procedure to ensure the production well, save delivery time, and reduce any waste to satisfy all clients all over the world.
6


BRANDO company welcome clients from all over the world, we attend exhibition in many countries, such like America, Europe, Australia, Malaysia, Pakistan, Egypt, New Zealand, Poland, Germany, Korea, India, Indonesia, etc. We highly welcome your visit at our booth or our company.

2


Quick review of BRANDO products:

valve

valves2

pulse valve

armature and coils



Company Info
  • Company Name: NINGBO BRANDO HARDWARE CO.,LTD
  • Representative: Lu Jin Jun
  • Product/Service: Solenoid Valve Armatures , Solenoid Valve Coils , Pneumatic Solenoid Valves , Pneumatic Cylinders , Pulse Jet Diaphragm Valves , Pneumatic Components
  • Capital (Million US $): 1000,000RMB
  • Year Established: 2008
  • Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
  • Export Percentage: 81% - 90%
  • Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
  • No. of Production Lines: 10
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 11 -20 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 3,000-5,000 square meters
  • Factory Location: Ningbo
  • Contact Person: Mr. Brandon Bao
  • Tel: 86-0574-83879820